Made from heavy-gauge steel and pre-drilled for assembly with two 1/4" bolts and two #8 or #10 flat head screws.

Click image for dimensions

Return to Products

This is the most commonly used Shackle Plate™. Will accept shackles or jaw type turnbuckles with a 1/2" through-bolt and mounts easily to the bottom-rail of any flat or for use as a floor or ceiling plate.

Maximum Recomended Working Load

Click for Details

Technical Datasheet


"Shackle Plate"
with 1/2" Hole
Part # 2010

There are five uniquely different designs in the Shackle Plates™ Dynasty. Each one allows you the freedom of choice as you design the rigging requirements of your scenery, as well as meeting the changing needs of every production.
Quick and easy to use. Choose the best suited Shackle Plate™ for your project and simply attach it by bolting to the lowest point of the scenery directly in line with the Keeper Plate™ that you have bolted to the top of the scenery. The cable line used to suspend the scenery is attached to the Shackle Plate™ and then run though the Keeper Plate's™ eye opening and finally onto the suspending point. Now you're ready to go.
All content 2008 Theatrical Hardware.Com, All rights reserved.